How to Install:

Step 1: Open and Place Your Hand Inside

Step 2: Place POCKETLOCKER Into Your Pocket

Step 3: Attaching POCKETLOCKER

Align the Top of POCKETLOCKER With the Top of the Pocket. Use Your Thumb to Push the Two Together and Pinch from the Other Side.

Step 4: Attach the First Pin

Pin the device to you pocket through the area you've pinched together.

Step 4: Attaching the Second Pin

Ensure POCKETLOCKER is properly flat inside the pocket. Here is when you might need to stretch it out or fold it to get a snug fit.
Find the bottom of the device by feeling it through the pocket. You will be able to feel the bottom of the zip.
Once you've found it, pinch the device and the pocket together at about a thumbs distance from the bottom of the zip and pin it in.
*Note: Make sure POCKETLOCKER is properly stretched out before pinning it in. Otherwise, it can become bunched up which makes it difficult to unzip.

Step 5: How it Should Look 

If you've done it correctly, it should look like this.
Depending on your preference, you can also place the pins in from the inside of your pocket!

Step 6: All Done!

Enjoy your peace of mind and safe travels!

Same Instructions, But For Those Who Like Images.


Step 1: Open and Place Your Hand Inside

Pull the zip open and place your hand inside POCKETLOCKER

 

Step 2: Place Your Covered Hand Into the Pocket

Move it around until it fits flat inside the pocket. Fold the far corners in order to get it to fit, if required.

Move the POCKETLOCKER so that it's just behind the edge of the pocket.

 

Step 3: Attach to the Pocket

Attach POCKETLOCKER to the pocket directly above and below the zip. The easiest way to install the pins is to turn your garment inside out, however, you can also attach it from within the pocket if you wish. Note that it is more difficult to align the pinning edges from within the pocket.

 

Good to Go!